Kits vs ready-made (was RE: Rebirth of IMSAI)

From: Allison J Parent <allisonp_at_world.std.com>
Date: Thu Apr 1 20:17:12 1999

<What I do if I can stand the stray capacitance (and I often can) is take
<a piece of copperclad for the groundplane. I then stick (double-sided
<tape is strong enough) little 'islands' of stripboard, track side up onto
<the groundplane. Solder the ICs to the stripboard. Then solder the ground
<wires from the strips to the groundplane (as short as possible). That
<will anchor the stripboard in place. Decoupling caps go from the power
<strip straight to the groundplane, etc.

That happens to be an effective way to do it. Works well for RF too.

As to proto, I have a few peices of equipment that were deliberately built
that way with over 15years on them. With a little care it can be very
rugged.

Allison
Received on Thu Apr 01 1999 - 20:17:12 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:38 BST