> In a box (from Dave, IIRC) I have found (3) three RLV11 cardsets,
>the printsets for same, and the printsets and drawings for the RL01
>and 02. This is kinda like going thru the pockets of an old coat
>...
>... I know that Zane has successfully attached RL02s to his 11/73, and
>I wanna do that, too...
You're fine, as long as your 11/73 has less than 248 kbytes in it.
The RLV11 won't DMA any higher than 18-bits; if you've got 256kbytes
or more of RAM, you want a RLV21.
> The 11/73 has an RQDX2 and one RX02 8"... tell me how much more
>info to provide and I'll do that. I'm going to try to install the
>boards, but the little backplane is stuffed and I need to re-arrange
>some things.
Oh, yes, the backplane: You need two adjacent slots with the "CD"
bus. Depending on what else you have, this may not be possible in a BA23.
> Wait... will RLV11s go in the 11/44??? That would be major cool,
>as well...
No, the RLV11's won't, but a RL11 will.
--
Tim Shoppa Email: shoppa_at_trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
Received on Sat Apr 03 1999 - 14:25:48 BST