Variac

From: Dave Dameron <ddameron_at_earthlink.net>
Date: Sat Apr 10 14:11:49 1999

Hi Sam,
At 03:04 PM 4/10/99 -0700, you wrote:
>
>I have a Variac here that I need help connecting up.
>
>The panel also shows the voltages as depicted. I'm assuming the output is
>2 and 4. But what is the input?
>
>The 20v sections seemingly say that you can tap off of them to get some
>combination of 20V, 120V or 140V?
>
Normally the input would be across a 100+20=120 V section (one wire at the
CCW end = common, neutral).
The output would be across the arm and common so you would get 0 to 140
volts as you turn the dial CW.
-Dave
Received on Sat Apr 10 1999 - 14:11:49 BST