1802 data sheets: was old data books

From: CLASSICCMP_at_trailing-edge.COM <(CLASSICCMP_at_trailing-edge.COM)>
Date: Wed Apr 21 09:22:59 1999

>> If you want to continue the search further, Harris has online data
>> sheets for much of the CDP18XX series (including the classic 1802
>> interface and memory parts), and maybe one of these will have a file
>> number for an 1801 data sheet. After you get a file number, you can
>> usually have the folks at Harris fax the data sheet to you.

>I have full 1802 docs from back when the elf article was published.

Good - if you can find some RCA file numbers for the 1801's in there
for Eric, this'll be a huge step forward in getting the 1801 data sheets
from RCA and/or Harris.

>The 1801 series was a less dense (hence teo chips) version of the 1802
>and was discontinued with the advent of the 1802 back around '76.

Yep - this is why you need the file number before you can get any further.
The data probably exist in paper form, but aren't indexed in any of the
on-line databases that the manufacturers still have. It's like getting
obsolete parts from DEC; first you have to convince yourself that such a
part still exists, then you have to find the part number, and then you
often find it's an off-the-shelf item even though it might not have been
produced for 20 years. (Examples of stuff I've ordered in the past few years
are RX02 and RL02 drive belts, and even a can of Magna-See.)

In the case of DEC parts, having a dumpster-dived copy of the "Option/Module
Hardware List" stamped "DEC Confidential" all over it helps a little
bit :-).

-- 
 Tim Shoppa                        Email: shoppa_at_trailing-edge.com
 Trailing Edge Technology          WWW:   http://www.trailing-edge.com/
 7328 Bradley Blvd		   Voice: 301-767-5917
 Bethesda, MD, USA 20817           Fax:   301-767-5927
Received on Wed Apr 21 1999 - 09:22:59 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:44 BST