OT: Power Supply voltage for Dayna Etherprint-T plus?

From: Mike Ford <mikeford_at_netwiz.net>
Date: Sun Aug 1 04:14:52 1999

> My apologies. Dayna's web site says "Farewell", and the intel site
>to which it points gave it a good try but didn't answer the question. I
>recently got a Dayna Etherprint-T Plus but not the power supply for it and
>i have no idea what voltage or current it needs. I'm pretty sure the unit
>is later than 1989 but if anybody has one and could check out the power
>supply to see what it says and email me off-list, I'd appreciate it very
>much. Thanks!
> - Mark

Here is a snip from a mac list I am on;

I've used the EtherPrint for about a year now with the 9V power supply and
it has worked without a hitch (at least as far as the PS is concerned).
Internally, the EtherPrint has a standard +5V regulator (7805 or
equivalent) connected to the external power supply. A 9V power supply will
power this with no problem. Anything more is just making more heat inside
the EtherPrint.

Clark Martin
Redwood City, CA, USA
Macintosh / Internet Consulting
Received on Sun Aug 01 1999 - 04:14:52 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:48 BST