OT: Power Supply voltage for Dayna Etherprint-T plus? (resolution)

From: Mark Tapley <mtapley_at_swri.edu>
Date: Sun Aug 8 23:07:40 1999

Anybody who started with this thread (and many thanks to Mike Ford),
        I got a second hand wall-wart power supply which puts out 9v dc 500
mA. The connector on the wall-wart cable has a socket for a central pin and
an outer conductive barrel. The socket is +, the outer barrel is -
according to the power supply label.
        I plugged it into the Etherprint-T Plus and it ran fine for at
least 5 minutes (after which I unplugged it and went to bed). I'll let you
know if it causes trouble later. YMMV, of course, but as far as I can tell
Mike's forwarded post took care of me perfectly. Thanks, Mike!
                                                - Mark
Received on Sun Aug 08 1999 - 23:07:40 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:49 BST