>OK, I've run a bunch of tests the last few hours while writing this up (and
>spending a lot of the time with the troubles at work). I have found one
>setting on the RQDX3 that I'm not sure about. Should I have the LUN set,
>and if so to what? Actually in this case identifying the jumpers to jumper
>might be helpful, as I'm using a scan of the pages dealing with the RQDX3,
>and don't have actual doc's on it. What I do have isn't clear at all about
>LUN's. I think I should either not have it set, or set it to 4 or 8,
>but....
Some operating systems will insist that unit numbers on one MSCP controller
not duplicate those found on another. RSTS/E is picky about this, but RT-11
isn't - you can start the unit numbers from wherever you want.
--
Tim Shoppa Email: shoppa_at_trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
Received on Sun Aug 22 1999 - 13:44:21 BST