Adding 4116 to memory board was This guy needs a *LART*... :-/

From: Enrico Badella <enrico.badella_at_softstar.it>
Date: Mon Dec 6 02:10:30 1999

Tony Duell wrote:
>
> > Regarding 4116 RAMS, I have a couple of M7891 64KW boards and lots of
> > 4116 RAMS. I would like to try bring it to 128KW by soldering in the
> > missing chips. At the moment I have added sockets for all this missing chips
> > including the 74LS240. The only missing things are the resistor packs
> > I don't have any info, the label on the package is simply 13-15679-0 037.
> > Can anybody tell me what I can use to replace them. I would also need to
>
> I've probably got the docs somewhere, but I can guess at what resistors
> to use... 33 Ohm ones
>
> If they're SIL packages, then they're connected 1-2, 3-4, etc. 4 (or
> maybe 5 if it's 10 pin SIL) resistors.

Thanks Tony,

The are SIL. If you come up with the docs please email me, otherwise I'll
just have to pull one out and measure it.

e.

========================================================================
Enrico Badella email: enrico.badella_at_softstar.it
Soft*Star srl eb_at_vax.cnuce.cnr.it
InterNetworking Specialists tel: +39-011-746092
Via Camburzano 9 fax: +39-011-746487
10143 Torino, Italy

  Wanted, for hobbyist use, any type of PDP and microVAX hardware,software,
  manuals,schematics,etc. and DEC-10 docs or manuals
==========================================================================
Received on Mon Dec 06 1999 - 02:10:30 GMT