HP-IL/RS232C Interface

From: Don Maslin <donm_at_cts.com>
Date: Fri Dec 10 18:42:28 1999

On Fri, 10 Dec 1999, Joe wrote:

> At 02:42 PM 12/10/99 -0800, Don scribbled:
> >
> >
> >On Fri, 10 Dec 1999 thomas.h.lindberg_at_se.abb.com wrote:
> >
________O/_______
        O\
> >> I'm willing to trade the HP-IL RS232 device for (almost) anything for the
> >> HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
> >>
> >> Thomas
> >>
> >
> >Thomas, for your HP 110+ I have the following software:
> >
> > HEWLETT-PACKARD
> >
> >Name Format Description
> >100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
> >100-UTIL DSDD HP 100 series utilities
________O/_______
        O\
> Carefull there! The 110 won't run CPM. (believe it or not Don!) You
> need to check those others and see if they're for the 120/125, 150 or 110.
> They're all 100 series machines but they're all different. SOME of the 150
> stuff may run on the 110 but only if it's not tailored for the 150. The
> 150 is MS-DOS but it's very different from the IBM PC and most (all?) of
> the HP software that I have for it has been tailored to run on the 150 and
> can't be used on the 110.

Sloppy nomenclature on my part. I know that the 150 won't run it
(without MYZ80 or such) but I made an (unwarranted) assumption about
the 110. Thanks for the correction.

                                                 - don
Received on Fri Dec 10 1999 - 18:42:28 GMT