HP-IL/RS232C Interface

From: Joe <rigdonj_at_intellistar.net>
Date: Fri Dec 10 20:50:43 1999

At 04:42 PM 12/10/99 -0800, you wrote:
>
>
>On Fri, 10 Dec 1999, Joe wrote:
>
>> At 02:42 PM 12/10/99 -0800, Don scribbled:
>> >
>> >
>> >On Fri, 10 Dec 1999 thomas.h.lindberg_at_se.abb.com wrote:
>> >
>________O/_______
> O\
>> >> I'm willing to trade the HP-IL RS232 device for (almost) anything for
the
>> >> HP110+, S/W, firmware, or the memory expansion board. Suggestions,
please!
>> >>
>> >> Thomas
>> >>
>> >
>> >Thomas, for your HP 110+ I have the following software:
>> >
>> > HEWLETT-PACKARD
>> >
>> >Name Format Description
>> >100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
>> >100-UTIL DSDD HP 100 series utilities
>________O/_______
> O\
>> Carefull there! The 110 won't run CPM. (believe it or not Don!) You
>> need to check those others and see if they're for the 120/125, 150 or 110.
>> They're all 100 series machines but they're all different. SOME of the 150
>> stuff may run on the 110 but only if it's not tailored for the 150. The
>> 150 is MS-DOS but it's very different from the IBM PC and most (all?) of
>> the HP software that I have for it has been tailored to run on the 150 and
>> can't be used on the 110.
>
>Sloppy nomenclature on my part. I know that the 150 won't run it
>(without MYZ80 or such) but I made an (unwarranted) assumption about
>the 110. Thanks for the correction.
>
> - don

  It's easy to confuse them since HP calls them all "Series 100".

   Joe
Received on Fri Dec 10 1999 - 20:50:43 GMT