It's ALIVE!

From: Don Maslin <donm_at_cts.com>
Date: Sun Feb 21 22:12:12 1999

On Sun, 21 Feb 1999, Jim Strickland wrote:

> Well, thanks to everyone with good suggestions, and especially thanks to Don
> for providing the boot disk image, I've been able to get the kaypro 4/84 to
> boot! It came up in conversation that there were later versions of teledisk,
> and after some heavy web searching I found one on a page for synthesiser users
> that works with my computer in a dos window, even. I guess I'll have to
> register it now. For reference, it's version 2.16.

You can not. Sydex took TeleDisk off of shareware in about 1992 IIRC.
There was too much abuse usage, I gathered.
 
> So now it's off to Oak for nifty apps, I guess. :)
>
> I do have another question: the image on my kaypro's screen is somewhat
> cockeyed. Is there an easy fix for this?

With the power off and some time passed to let everything discharge,
loosen the clamp screws and rotate the yoke on the CRT neck. Check it,
and repeat as necessary. When it is right, tighten the clamp screws.
Please be careful, as there are very high voltages in that area that
linger for a while after shutdown.
                                                 - don
Received on Sun Feb 21 1999 - 22:12:12 GMT