Need Help was Old bank accounts
OK, I give up! Since the list is no longer plain text,
will someone familiar with Eudora Pro 4.0 PLEASE tell me
how to configure Eudora it so that formatting like this:
****************** START PASTE *************************
------=_NextPart_000_0004_01BE3A7A.7073A200
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
***************** END PASTE ****************************
Doesn't cause the rest of the digest to look like this:
***************** START PASTE **************************
------------------------------ Date: Thu, 7 Jan 1999 21:35:15 -0600 From:
"Paul Braun" To: classiccmp_at_u.washington.edu Subject: RE: Kim-1 Computer
Message-ID: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT Date sent: Thu, 7 Jan 1999 06:57:41 -0600
(CST) Send reply to: classiccmp_at_u.washington.edu From: Doug Yowza To:
"Discussion re-collecting of classic computers" Subject: RE: Kim-1 Computer
Originally to: Discussion re-collecting of classic computers > Mine is a
late model S/N 6176, postage cancled on May 18, 1977. > >From the few data
points so far, I'd say we've got monotonically > increasing serial numbers
starting with 1. (Of course, if they were C > programmers, then the first
one is S/N 0.) > > -- Doug OK. I had to look. My second KIM is #1051 with a
Rev. A board. It has the white ceramic MOS chips. This one shows plenty of
wear, however. It's mounted on a piece of masonite with a socket for the
one edge connector, a little bracket for a couple of 1/8" phone plugs (tape
connections), an expansion port (Centronics-type, I assume this is where it
was cabled up to a modified Selectric) and a terminal strip for power. The
LED's have had sockets installed under them, since I assume the originals
burned out. The 6502 also is socketed. This KIM was used by Stan Ockers and
Jim Butterfield while writing the "First Book of KIM". Stan would take it,
in the little briefcase he gave me along with it, to a computer club
meeting in Chicago where a guy had an IBM Selectric that he had modified to
work as a printer. Stan would load the programs he, Jim, and their partner
(sorry -- don't have my FBOK in front of me and the other name escapes me)
had written, and then print them out on the Selectric. These printouts were
then cut and pasted into the layout for the book. Is the bottom numbe on
the die cover the date code? If so, my 6502 is dated 1576. The thing is,
regardless of how much they sell for on e-pay, it means so much more to me
that Stan sat down and talked to me for an hour and a half about the book
and computing in those days and then gave me his KIM that I couldn't think
about selling it. Paul Braun NerdWare -- The History of the PC and the
Nerds who brought it to you. nerdware_at_laidbak.com www.laidbak.com/nerdware
********************* END PASTE *******************
THANK YOU VERY MUCH
=========================================
Doug Coward
Press Start Inc.
Sunnyvale,CA
=========================================
Received on Fri Jan 08 1999 - 16:30:36 GMT
This archive was generated by hypermail 2.3.0
: Fri Oct 10 2014 - 23:32:04 BST