Micro/Vax/Station 2000 question

From: allisonp_at_world.std.com <(allisonp_at_world.std.com)>
Date: Tue Jun 1 10:14:40 1999

On Mon, 31 May 1999, Don Maslin wrote:

>
> I am a little frustrated and sure that I am missing something rather
> obvious. However, what must I do to assure that VMS (5.5) recognizes
> my RX33 floppy drive, DUA2, on bootup without having to run SYSGEN and
> Autoconfigure All each time. The machine tries to boot from it if it has
> a disk installed and then switches to the RD54 DUA0 to go on to boot.

Trying to boot devices in sequence is normal. Once VMS is running
you can do a show dev that will show al disk devices that start with
Dxxx.

To read or write to the floppy you whill ahve to "mount" it. Read Help
Mount.

Allison
Received on Tue Jun 01 1999 - 10:14:40 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:15 BST