11/44 -> RL02 further...

From: John Lawson <jpl15_at_netcom.com>
Date: Tue Jun 8 11:41:33 1999

  After writing the last message, I wrenched the machine out of the
rack onto a table and found that:

  Slot 14 had a jumper

  Slot 13 did not.

  So after three or four boot-ups with various clip leads installed,
I have taught myself that the jumpers are not needed in 13 and 14 if
the RL11 and Emulex cards are in them.
 
  And: woo-hoo! I have the cards in the slots I wanted them to go
in, and the machine boots and runs as normal.

  Mebbe tonite I'll drag up some RL02s and see if I can get them
talking to the RL11.

  I still am not sure about the driver modules: from whence they
come (distribution kit?) and how they get integrated into RSTS. Does
one just copy them into the working directory? Does a partial SYSGEN
need be done? Are they already there, just hiding?

  Thanks...


  John



  
Received on Tue Jun 08 1999 - 11:41:33 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:15 BST