> Both drives act like there is no clock coming from the RL11.. the
> Fault and Ready lights are on and the drive does not spin up when
> the Load button is pushed. If I open the drive and jumper the
> appropriate points, the spindle does come up to speed, tho the heads
> never extend.
>
> John
>
Been a long time, but it sounds to me like the cable on the RL11
may be reversed at the transition block.
I'd flip it. I don't think it does any harm.
One other issue... check the round cable for bent pins.
Anyone in the group with any suggestions.
Bill
---
bpechter_at_shell.monmouth.com|pechter_at_pechter.dyndns.org
Three things never anger: First, the one who runs your DEC,
The one who does Field Service and the one who signs your check.
Received on Thu Jun 10 1999 - 06:26:22 BST