Televideo TS-806/20

From: Richard Erlacher <edick_at_idcomm.com>
Date: Fri Jun 11 19:24:18 1999

Well, I'm not sure I agree about the relative importance of cables with
which to interface a hard disk. That's probably the one thing that makes a
computer compute fast enough to be useful.

First of all I'd try 9600 baud before anything else, since I believe that's
the default. I don't remember what the board switches do, but I can hunt
around for the manual and get back to you. I wouldn't use PCAW, as a
terminal, myself. I haven't had good luck with it. How about Hyperterminal
of Procomm. I've used both of those in connection with a PC and had better
luck than with PCAW, though I've had good luck using PCAW for file
transfers, etc.

This box was ostensibly a file server and probably contains VERY important
software, e.g. the MMMost (or whatever it was called) network OS, which
isn't around any longer. This box is capable of serving as a single-user
system, but if you still have the HDD, from which it should boot all by
itself if it hasn't been roached up, you might want to preserve it.

Well you're in luck . . . I got a phone interruption after which I thought
of a place to look for the manual...Oddly enough, that's where it was.

The manual says the "upper" four bits of the dip switch is used for baud
rate settings. The lower four bits (5,6,7,8) are unused except for position
8 which is reserved for diagnostics. Obviously, the one who wrote this
manual was on drugs. A closed switch is a zero.

The baud rates go from 19.2K down to 75, with ascending values from 0000 to
1000, remembering that a 0 means CLOSED. Switch 1 is the lsb.

I hope that helps you get it going!

If you need a boot diskette, maybe I can help you there as well.

Televideo, by the way, is still in business, so it's not inconceivable they
might be able to help too, if you ask them.

Dick



-----Original Message-----
From: Devon <bobcaar_at_cyberdude.com>
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Date: Friday, June 11, 1999 5:18 PM
Subject: Re: Televideo TS-806/20


>I don't have the cables for the winch (control) or winch (data) ports
>although I have a board for them...they aren't important, I just thought
>I'd mention that. I don't have a (working) terminal right now, so I tried
>it with my pc (via serial port & pcAnywhere emulation of TVI 925 _at_ 75 to
>1200 baud settings, n&e&o parity, 4 - 8 data, and 1 stop). With any of the
>settings, I get garbage on the screen. I would like to get it to work with
>my pc. Any help in those settings in particular would be great. I noticed
>8 dip switches on the main board. Do you know what they are for?
>
> T.H.x.
> Devon
>
>
>At 09:35 PM 10/06/1999 -0600, you wrote:
>>I use a TVI 925 with mine. I suppose it's possible to set it up for
>>something else, and perhaps that's what's happened.
>>I think my TVI is set for n-8-1. When you say no cables or conntectors,
do
>>you mean for the internal HDD, or do you mean you have two HDC's?
>>
>>What software is it you think you're missing?
>>
>>Dick
>>-----Original Message-----
>>From: Devon <bobcaar_at_cyberdude.com>
>>To: Discussion re-collecting of classic computers
>><classiccmp_at_u.washington.edu>
>>Date: Thursday, June 10, 1999 8:38 PM
>>Subject: Televideo TS-806/20
>>
>>
>>>Hello,
>>>
>>> Can anyone help me with Televideo TS-806/20 information? In particular
>>>some info on a terminal emulation that will work with it. Currently, I
get
>>>garbage with it hooked up to my pc (using pcAnywhere emulation of
Televideo
>>>912, 920, 925, ANSI, or X3270/Televideo). The garbage is alway the same
>>>each boot. Also info on parity, data bits, stops would be handy. It's a
>>>1981 Z80 based system with a 5 1/4 DS?D Floppy and MFM hard drive. It
also
>>>has 6 user, centronics printer, serial, winch (data), winch (control)
ports
>>>(no cables or connectors for the last 2 but there is a board). I don't
>>>have the manuals or any software for it.
>>>
>>> T.H.x.
>>> Devon
>>>
>>
>>
>
Received on Fri Jun 11 1999 - 19:24:18 BST