>IIRC in an 11/34, the power connectors are at the A-end of the backplane.
Come to think of it, I think you're right... confirmed by the fact
that the grant cards go in the D slot, which is the fourth from the
back of the chassis...
>It wouldn't be hard to make up the harness. It does have 2 connectors on
>the PSU end (15 way for power and 6 way for LTC/ACLO/DCLO). The VT11 does
>use LTC IIRC to sync the display to the mains and reduce flicker.
I guess I could make a harness if I can't find the one which already
has one... I'd like to have the printset so I can make the cable lengths
correct, and so I have the part numbers for the connectors...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '_at_' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL:
http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
Received on Tue Mar 30 1999 - 20:52:33 BST