Transfer Drum was:(no subject)

From: Dwight Elvey <elvey_at_hal.com>
Date: Mon May 17 18:29:16 1999

Dwight Elvey <elvey_at_hal.com> wrote:
> If not, it is more likely
> the high voltage corona supply that has failed.
> Dwight

Oops!
 I forgot to mention that is might be a simple short on the
corona wire. Even a small piece of dust that you'd need a
magnifying glass to see will be enough to stop the printer
from working. Do not put any kind of cleaner on the green drum
but the corona wire can be cleaned with alcohal. Be carful
not to put any stress on it because it is vary fine and
breaks easily. I usually brush along with a q-tip. Brush
from the ends towards the center so you don't push grunk
to the ends where it would be harder to remove. There are usually
three corona wires. One is to precharge the drum, one
to reverse the charge on the drum and one to transfer
tone from the drum to the paper.
Dwight
Received on Mon May 17 1999 - 18:29:16 BST