AIM 65 question

From: Richard Erlacher <edick_at_idcomm.com>
Date: Tue May 25 09:31:14 1999

NOW . . . The interesting question is whether the firmware versions you have
support the ROCKWELL CMOS versions or only the NMOS parts. Rockwell made
the AIM 65 its evaluation system for their entry in the 6502 market, but
their CMOS version is the one whose instruction set I thought was the best
of all of them. If your AIM boards have the assembler and BASIC interpreter
for the CMOS version, that's something to hang onto since it's still current
as far as the compatible cores are concerned.

Dick

-----Original Message-----
From: Joe <rigdonj_at_intellistar.net>
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Date: Tuesday, May 25, 1999 4:15 AM
Subject: Re: AIM 65 question


>They are. Two are optional BASIC and the other is optional Assembler.
>
> Joe
>
>At 10:49 PM 5/24/99 -0700, you wrote:
>>These 24 pin chips sound to me like ROM's.
>>
>>William R. Buckley
>>
>>-----Original Message-----
>>From: Joe <rigdonj_at_intellistar.net>
>>To: Discussion re-collecting of classic computers
>><classiccmp_at_u.washington.edu>
>>Date: Monday, May 24, 1999 2:59 PM
>>Subject: AIM 65 question
>>
>>
>>>Hi,
>>>
>>> I picked up several AIM 65 computers. I've noticed that some of them
>>>have two 24 Pin ICs in the lower right corner and some have five. Anyone
>>>know what the difference is? Also some have only two of the 19 pin ICs
in
>>>the top right corner and other have eitht ICs there. What's the
difference
>>>there?
>>>
>>> Anyone know of a site where I can find out more about these and the
>>>commands to operate them?
>>>
>>> Joe
>>>
>>
>>
>
Received on Tue May 25 1999 - 09:31:14 BST