AIM 65 question

From: Joe <rigdonj_at_intellistar.net>
Date: Tue May 25 16:40:18 1999

Dick,

  That's an interesting question! I wonder what the difference in the
software is? I don't think I've ever heard of a CMOS AIM 65. The BASIC
comes up as ver 1.1. I didn't see a version on the assembler. The ICs
containing the assembler and BASIC don't have any special markings. They're
PN is the same as the PN of the two standard ROMs except one digit is
different.

   Joe

At 08:31 AM 5/25/99 -0600, you wrote:
>NOW . . . The interesting question is whether the firmware versions you have
>support the ROCKWELL CMOS versions or only the NMOS parts. Rockwell made
>the AIM 65 its evaluation system for their entry in the 6502 market, but
>their CMOS version is the one whose instruction set I thought was the best
>of all of them. If your AIM boards have the assembler and BASIC interpreter
>for the CMOS version, that's something to hang onto since it's still current
>as far as the compatible cores are concerned.
>
>Dick
>
>-----Original Message-----
>From: Joe <rigdonj_at_intellistar.net>
>To: Discussion re-collecting of classic computers
><classiccmp_at_u.washington.edu>
>Date: Tuesday, May 25, 1999 4:15 AM
>Subject: Re: AIM 65 question
>
>
>>They are. Two are optional BASIC and the other is optional Assembler.
>>
>> Joe
>>
>>At 10:49 PM 5/24/99 -0700, you wrote:
>>>These 24 pin chips sound to me like ROM's.
>>>
>>>William R. Buckley
>>>
>>>-----Original Message-----
>>>From: Joe <rigdonj_at_intellistar.net>
>>>To: Discussion re-collecting of classic computers
>>><classiccmp_at_u.washington.edu>
>>>Date: Monday, May 24, 1999 2:59 PM
>>>Subject: AIM 65 question
>>>
>>>
>>>>Hi,
>>>>
>>>> I picked up several AIM 65 computers. I've noticed that some of them
>>>>have two 24 Pin ICs in the lower right corner and some have five. Anyone
>>>>know what the difference is? Also some have only two of the 19 pin ICs
>in
>>>>the top right corner and other have eitht ICs there. What's the
>difference
>>>>there?
>>>>
>>>> Anyone know of a site where I can find out more about these and the
>>>>commands to operate them?
>>>>
>>>> Joe
>>>>
>>>
>>>
>>
>
>
Received on Tue May 25 1999 - 16:40:18 BST