Micro/Vax/Station 2000 question

From: Don Maslin <donm_at_cts.com>
Date: Mon May 31 23:42:49 1999

On Mon, 31 May 1999, Don Maslin wrote:

> On Mon, 31 May 1999, Don Maslin wrote:
>
> >
> > I am a little frustrated and sure that I am missing something rather
> > obvious. However, what must I do to assure that VMS (5.5) recognizes
> > my RX33 floppy drive, DUA2, on bootup without having to run SYSGEN and
> > Autoconfigure All each time. The machine tries to boot from it if it has
> > a disk installed and then switches to the RD54 DUA0 to go on to boot.
> >
>
> I think I just solved my own problem. Running SYSGEN and Autoconfigure
> followed by AUTOGEN seems to have made VMS 'remember'! That's good news.
>

I did, but it was not what I thought. Turns out that setting STARTUP_P1
"MIN" appears to be the culprit that makes VMS 'forget'. Using "" instead
seems to restore its memory.

                                                 - don

Geez! This is really bad form - commenting on your own message TWICE!!!
Received on Mon May 31 1999 - 23:42:49 BST