CP/M-80 drivers for WD33C93 ???

From: Richard Erlacher <edick_at_idcomm.com>
Date: Sat Nov 27 01:03:02 1999

Has anybody got a CP/M-80 BIOS driver example for the WD33C93 SCSI
controller? I'd surely like to look at one or two. Format utility stuff
would be good, too.

Any source code will be eagerly looked at.

thanx

Dick

-----Original Message-----
From: B'ichela <mdalene_at_home.ctol.net>
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Date: Friday, November 26, 1999 11:39 PM
Subject: Re: do you still need XT parts?


>On Fri, 26 Nov 1999, Tony Duell wrote:
>
>> [...]
>>
>> > I will summarise the pieces I am looking for below in detail:
>>
>> [...]
>>
>> > 1 Cassette cable for the IBM-PC computer
>>
>> I believe this is the same cable as is used with most models of TRS-80
>> (1/3/4/CoCo/M100/etc). So you could use one of those (which I assume are
>> fairly easy to find) if you can't get the official IBM cable (did it
exist?)
>>
>> -tony
>>
> Having both a Model 102 and a Tandy Coco 1,2 and 3 I have two of
>those cassette cables you mentioned. now I only need to save some money to
>buy a working cassette recorder.
> Reguarding this. If I could find the basica.com file for the Xt on
>a pcdos disk. does this wrapper/patcher allow the support of the cassette
>unit in addittion to the disks or only the disks? If by default basica.com
>only patched the rom basic to use disks. how do you port files from
>cassette tape to disk?
>
> A pearl of wisdom from the y2K newsgroups:
>-------------------------------------------------------------------------
>Y2K appears to be the Baby Boomers mid-life crisis, and it has the
>potential to be a dandy.
> -- Anonymnous --
>--------------------------------------------------------------------------
>
> B'ichela
>
>
Received on Sat Nov 27 1999 - 01:03:02 GMT