ST82500N: Need jumpers/switches

From: Chuck McManis <cmcmanis_at_mcmanis.com>
Date: Mon Dec 4 02:11:13 2000

This sounds more like an IPI drive than a SCSI drive. But if it is SCSI
then there are a couple of things you can try:
         1) Look for a set of three jumpers somewhere that have 'id' or
'addr' etched or silk screened near the board. If that doesn't work try
adding a jumper (carefully) at each point and then probing the bus until
the unit number changes.
         2) Read the code page and see if you can set the LUN to sometong
other than 0

--Chuck
Received on Mon Dec 04 2000 - 02:11:13 GMT