ST82500N: Need jumpers/switches

From: Don Maslin <donm_at_cts.com>
Date: Mon Dec 4 17:24:46 2000

On Mon, 4 Dec 2000, Chuck McManis wrote:

> This sounds more like an IPI drive than a SCSI drive. But if it is SCSI
> then there are a couple of things you can try:

The Pocket PCRef lists three variants of the ST82500x - x=J=SMD-E,
x=K=IPI-2, and x=N=SCSI.
                                                 - don

> 1) Look for a set of three jumpers somewhere that have 'id' or
> 'addr' etched or silk screened near the board. If that doesn't work try
> adding a jumper (carefully) at each point and then probing the bus until
> the unit number changes.
> 2) Read the code page and see if you can set the LUN to sometong
> other than 0
>
> --Chuck
>
>
Received on Mon Dec 04 2000 - 17:24:46 GMT