Reviving a MicroVAX II

From: Chuck McManis <>
Date: Sun Jul 2 01:44:59 2000

I'd recommend a nice ESDI controller (Dilog 696-20 or RQ11D/E
(Webster/Sigma/etc) If you can find a RRD-40 interface (CD-ROM) that would
be good to since VMS from CD is easier to load than VMS from TK50 (having
done both recently I really recommend CD). If you can find (good luck!) a
SCSI controller for it then your options are pretty much wide open. BTW VMS
lives very nicely on a 500 - 600MB disk with lots of layered products.


At 11:04 PM 7/1/00 -0500, you wrote:
>What all drive options are there and what would people
>recommend? What are my options for getting VMS for this? Any
>other help or comments appreciated.
Received on Sun Jul 02 2000 - 01:44:59 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:55 BST