> And I've managed to get WWENG1.SYS booted into this thing but it won't give
> me a prompt on port 0 (I get all the status messages up to "no TCP/IP
> address and SNMP isn't starting" and then nada, zip.
It sounds like the unit is configured for either a different baud
rate or port 0 is not configured for access. Try a different baud
rate or port. Also, if you have a system connected to the network
with LAT support, see if the unit is announcing itself. If it is,
login via LAT.
> Does the 1MB image have a command interpreter in it? If not do I have to
> use something else to configure it? Sorry for all the questions but the
> DNPG site is not useful in this regard.
Yes. The biggest difference between WWENG1 and WWENG2 is TCP/IP (WWENG2
supports TCP/IP, WWENG1 doesn't).
--
Eric Dittman
dittman_at_dittman.net
Received on Tue Aug 07 2001 - 23:29:45 BST