Just curious about injection molding or casting

From: Doug Coward <mranalog_at_home.com>
Date: Sat Aug 25 21:33:52 2001

 Tony Duell said:
> I've not tried this, but David (? maybe Vincent) Gingery has written a
> book on DIY injection moulding. Although the machine descibed will only
> do small parts (<10g or so), it would seem it could do switch levers,
> etc. I think scaling it up would be difficult, as the mould is not
> heated, so the plastic would most likely solidify before the mould was
> filled.

  It's Vince Gingery. I have this book.
  http://www.lindsaybks.com/dgjp/djgbk/inject/index.html

  Dave Gingery did the line of foundry books and the
7 book set "Build Your Own Metalworking Shop from Scrap".
(Makes me feel like a kid again).

 All of it is at Lindsay Books
 http://www.lindsaybks.com/prod/index.html
 every book you need to rebuild the world
 after the apocalypse.
 Regards,
 --Doug
=========================================
Doug Coward
_at_ home in Poulsbo, WA

Analog Computer Online Museum and History Center
http://www.best.com/~dcoward/analog
=========================================
Received on Sat Aug 25 2001 - 21:33:52 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:34 BST