The only connectors on the back of the machine are a female DB9 labeled
"UPS", another labeled "MI", a female DB25 with no label and two plug in
modules with the numbers 2609 and 6146 on them. I think I determined that
the 2609 is a two port communications adaptor and the 6146 is a floppy
adaptor. Where does the twinax cable connect?
----- Original Message -----
From: "Phil Schilling" <pjschilling_at_gcstech.net>
To: <classiccmp_at_classiccmp.org>
Sent: Wednesday, August 29, 2001 12:38 PM
Subject: RE: IBM AS/400 Advanced 36
> David,
> I gather it is twinax, do you have any connectors? As I remember you can
> use any twinax terminal but it must be connected to port 0 address 0,
IIRC,
> at least mine are setup that way. I think that I probably have an extra
> terminal around. All this will be moot point if they wiped out software
> though.
>
> Phil
>
> -----Original Message-----
> From: owner-classiccmp_at_classiccmp.org
> [mailto:owner-classiccmp_at_classiccmp.org]On Behalf Of David Betz
> Sent: Wednesday, August 29, 2001 10:52 AM
> To: classiccmp_at_classiccmp.org
> Subject: OT: IBM AS/400 Advanced 36
>
>
> I know this is a bit new to be of much interest to people here but I was
> recently given one of these and am at a loss as to what to do with it. I
> only received the actual box and I believe it requires a proprietary
> terminal as a console so I am unable to even determine whether it works.
> Does anyone here know anything about these machines?
>
>
Received on Wed Aug 29 2001 - 12:35:37 BST