Ampro Little Board questions...

From: Geoff Reed <geoffr_at_zipcon.net>
Date: Sun Dec 16 01:15:32 2001

At 08:36 PM 12/15/01 -0700, you wrote:
>A PC floppy cable certainly wouldn't work with the Little Boards I have, since
>they use the standard floppy disk cable, which has no twists or cuts.
>
>Dick

it should work if both drives were strapped at DS1 (iirc) all the flop does
is swap the drive select lines around so IBM (and clone makers) didn't have
to change any jumpers on the drive. I've used twist floppy cables in
morrow, Kaypro, and a few other CP/M boxen when I was in a hurry to get a
machine back up and going...
Received on Sun Dec 16 2001 - 01:15:32 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:39 BST