I have available for sale a floppy cable for an Ampro Series 100, which
was recently discussed to death.
The cable comes with some things attached:
Ampro Series 100 computer
MOdel 122 Serial # 1202
Case
2 Canon MDD211 drives
System appears to be complete and functional, but I have not tried it.
It does NOT have a SCSI card - there is a place for connector for that
with a block-off. The computer is free to whoever buys the cable.
The floppy cable (the object of much discussion) is 14" long. At one end
is a MALE dual row header (34 pin) that protrudes through a cutout in the
back of the case. 6.5" (approx) from that connector is a FEMALE card edge
connector that plugs onto the circuit board. 5.5" from that is another
FEMALE card edge on one of the drives. 2" from that is another FEMALE
card edge on the other drive.
IS THAT enough information?
It is currently at my office at Merritt College (Oakland CA hills). If
anyone wants it, I will be there tomorrow briefly at 3:00. After that,
you would have to wait until January, or pay me to make a separate trip
there.
--
Grumpy Ol' Fred cisin_at_xenosoft.com
NOTE: My ISP is having some problems. If you have difficulty reaching me
at this e-mail address, you can leave a message at:
fcisin_at_merritt.edu
cisin_at_info.sims.berkeley.edu
Received on Fri Dec 21 2001 - 00:23:49 GMT