Dick:
I misspoke. I do indeed need an assembler.
I had just finished using VC++ when I wrote that email :-)
Rich
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
-----Original Message-----
From: Richard Erlacher [mailto:edick_at_idcomm.com]
Sent: Thursday, February 22, 2001 8:03 PM
To: classiccmp_at_classiccmp.org
Subject: Re: 8080 Complier Recommendation
First of all, TASM isn't a compiler is it? The versions of TASM I have are
a
set of table-driven assemblers for a number of microcontrollers and
microprocessors. I personally like the CP/M (Digital Research) MASM
assembler,
which I've had since Christ was a corporal and I use it under the Z80MU CP/M
emulator, though that's not a requirement. You could, of course use any of
a
number of CP/M emulators, of which I imagine almost all CP/M-ers have at
least
two favorites.
If you're looking for a compiler that supports the 8080, you need an older
version of AZTEC 'C' (assuming that compiler means 'C' compiler to you)
which is
very similar, I'm told, to the CC65 for the 6502. There are, of course,
countless others. One notable free compiler is the HiTech (Pacific) 'C'
compiler for the Z80, of which there's also a free version for the PC. Most
of
the oldies are written to the K & R vision of 'C' rather than ANSI, which
didn't
have a standard back in the '80's.
Dick
----- Original Message -----
From: "Cini, Richard" <RCini_at_congressfinancial.com>
To: "'ClassCompList'" <classiccmp_at_classiccmp.org>
Sent: Thursday, February 22, 2001 2:02 PM
Subject: 8080 Complier Recommendation
> Hello, all:
>
> Does anyone have a "favorite" compiler recommendation for the 8080?
> I have TASM, which I like for the 6502, but it only does the Z80, which
has
> different opcodes. Thanks.
>
> Rich Cini
> http://highgate.comm.sfu.ca/~rcini/classiccmp/
>
>
Received on Fri Feb 23 2001 - 07:50:39 GMT