On 10 Jul, John Allain wrote:
> I for one wouldn't know what I was looking for in such a test.
Measure the resistence of the pins to GND. Get the SCSI pinout from
http://www.hardwarebook.net/connector/storage/scsiinternal.html
and of course you have to hnow that a terminated SCSI pin has a
resistence of 100 to 150 Ohms to GND. Now compare your measureing to
the pinout and if you get the right resistence on the right pins you
can asume it is SCSI.
The next step is to connect some SCSI device and play around in the
hope that the magic smoke does not escape.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
Received on Tue Jul 10 2001 - 10:02:04 BST