Need Compaticard II jumper and driver docs

From: Don Maslin <>
Date: Sat Jun 16 23:05:23 2001

On Sat, 16 Jun 2001, Edwin P. Groot wrote:

> I am trying to set up a Compaticard II Rev D as a secondary FDC, but I
> don't have the documentation. Anyone have a scanned copy of the manual?
> The Micro Solutions Web page does not have it online!
> The only parts I can figure out is the interrupt jumper on the card,
> and the drive type number on the ccdriver.sys command line. On the card
> why are there 2 sets of jumpers for I/O address and 2 sets of jumpers for
> DMA? I know that my primary FDC is at IRQ6 and DMA2. Do I have to jumper
> my Compaticard to both different IRQs and DMAs?

I do npt have the manual for the CompatiCard II; however, the
CompatiCard IV manual says that you need not pick alternate values
unless it chokes on sharing the system's values. Good luck!

                                                 - don

> Thanks for your help,
> Edwin
Received on Sat Jun 16 2001 - 23:05:23 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:59 BST