adding MSCP driver to 2.9BSD

From: Jonathan Engdahl <engdahl_at_cle.ab.com>
Date: Fri Jun 29 07:37:03 2001

I took the MSCP disk driver (the ra driver) from the PRO-350
version of 2.9BSD on the PUPS archive, and added it to the
regular 2.9 distribution. The new UNIX builds and runs.

I created nodes in /dev, and added a line to /etc/dtab, but the
driver doesn't seem to work.

I have figured out that the autoconfig will not work with this
driver. It reports "No autoconfig routines". Evidently, probe is
not implemented in either the 2.9 or 2.11 version of the MSCP
driver.

So, how to I get UNIX to "attach" the ra driver?

This is the first time I've tried doing a UNIX sysgen, so extra
explanations might be required. The only documentation I have is
what I downloaded along with the distribution.

--
Jonathan Engdahl             Rockwell Automation
Principal Research Engineer  24800 Tungsten Road
Advanced Technology          Euclid, OH 44117  USA
Euclid Labs                  http://users.safeaccess.com/engdahl
Received on Fri Jun 29 2001 - 07:37:03 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:01 BST