HP2748A papertape reader : connector ?

From: Bob Shannon <bshannon_at_tiac.net>
Date: Fri Jun 29 20:33:06 2001

Tony Duell wrote:

> >
> > The 2748A/B paper tape reader uses the "8-bit duplex register interface".
> > That would lead me to believe it's an 8 bit interface, not a 16 bit one.
>
> OK.... On later machines, all HP provided were 16 bit interfaces (like
> the 98032), and you used 8 of the data lines for paper tape input, I guess.

This is incorrect!

The HP tape reader uses a HP tape reader board that is unique, it is NOT the HP
8 bit duplex register board.

If need be, I can run downstairs and get the acutal part number.

I've jsut recently gotten my 2114A booting HP basic from my new HP paper tape
reader emulator hardware. I'm pretty familiar with the tape reader interfaces.

What I need, are the pin-outs for my old Decitek tape reader!
Received on Fri Jun 29 2001 - 20:33:06 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:01 BST