first step getting VAX 6000-400 booted ...

From: Eric Dittman <dittman_at_dittman.net>
Date: Thu Oct 25 13:16:58 2001

> --- Gunther Schadow <gunther_at_aurora.regenstrief.org> wrote:
> > - The DMB32 parallel printer is not a Centronics interface. But
> > I may actually have a printer to go with it. A BIG thing, not
> > heavy but taking up precious space if I put it into my
> > basement.
>
> We used to use an LP25 on our DMF32 (Unibus ancestor of the DMB32). It
> was a Dataproduct printer with a DEC badge. I do recall seeing a simple
> circuit somewhere involving an inverter or two to attach a Centronics
> printer to an LPV11. It shouldn't be a complicated matter to examine
> which signals on the DP port are low-true and which ones are low-true
> on a "Centronics" port and deduce which handshaking lines need inverted.

I seem to remember there was a converter (sold by Black Box, IIRC), but
the chances of finding one is pretty slim. You'd be more likely to find
a printer. Building your own converter would be the easiest as Ethan
suggests.

If you can find the manual on the DMB32 it should have the pinouts for
the cable, which will make building a converter even easier.
-- 
Eric Dittman
dittman_at_dittman.net
Check out the DEC Enthusiasts Club at http://www.dittman.net/
Received on Thu Oct 25 2001 - 13:16:58 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:20 BST