I've got one similar to that, though I'm not anxious to part with it. I'd
recommend you post a WTB: in misc.forsale.computers.pc-specific.motherboards and
see what you get in the way of offers. I've had to do this from time to time in
order to capitalize on my very reliable VLB adapters, not just for SCSI, but for
video and EIDE as well.
Dick
----- Original Message -----
From: "John Boffemmyer IV" <john_boffemmyer_iv_at_boff-net.dhs.org>
To: <classiccmp_at_classiccmp.org>
Sent: Saturday, October 27, 2001 7:51 AM
Subject: Re: VLB SCSI?
> Ok, i know i see flames coming on this one but i have to ask, hell, it's
> for my mother.
> Does anyone have a spare AT pentium board with docs? Hers was for a
> 386/486/P90 when the P90's were new and it died the horrible death of blown
> circuits. She really loved the machine and i'm looking for a way to give it
> back to her working once again. No Sridhar, put the hammer down, hehe.
> Anyone have any ideas, it had 2 VESA Local Bus slots, 3 ISA and 2 PCI? I'm
> willing to pay reasonably for it, even more if it actually has a chip on
> it. I have an original Zoom 14.4 VFX14.4V Serial modem with working power
> block and DB25M/F Serial cable (components dated 1991 and 1993 - probably
> cuz this is the voice/fax model). Was the like the one used in that stupid
> movie "Hackers" and is only missing the black semi-see-through faceplate.
> I'd toss that up for grabs with money for anyone who can help me out. And
> yes, still working on figuring out all of the damned SOL stuff. Chandra, if
> Newburgh (45 mins from Danbury) isn't too far from Boston, let me know, the
> SOL's still here.
> -John
>
>
> At 03:27 AM 10/27/01, you wrote:
> >I saw a '386 motherboard with VLB slots on Tuesday, but didn't bite. It
> >took me
> >WAY too long to give away all my old '386's, and the only one I kept was one
> >that uses a '287 coprocessor, just for interest.
> >
> >more below ...
> >
> >Dick
> >
> >----- Original Message -----
> >From: <jpero_at_sympatico.ca>
> >To: <classiccmp_at_classiccmp.org>
> >Sent: Friday, October 26, 2001 6:34 PM
> >Subject: Re: VLB SCSI?
> >
> >
> > > > Date: 26 Oct 2001 22:36:6 +0100
> > > > From: "Iggy Drougge" <optimus_at_canit.se>
> > > > Subject: Re: VLB SCSI?
> > > > To: "Chad Fernandez" <classiccmp_at_classiccmp.org>
> > > > Reply-to: classiccmp_at_classiccmp.org
> > >
> > > > Chad Fernandez skrev:
> > > >
> > > > >I would consider VLB to be classic, or at least "legacy". I guess it
> > > > >depends on the definition. I don't think any VLB cards have been
> > > > >shipped for quite some time. They were mainly a 486 class bus. Did
any
> > > > >Pentium or 386 class motherboards come with VLB slots?
> > > >
> > > > I think I've got a Pentium VLB mobo laying about in the public spaces
> >here...
> > >
> > > Based on OPTI chipset and very poor quality, works w/ 1 72pin simm
> > > but severely penalizes performance. Pair up of memory simms and
> > > performance improves but not as fast as true pentium chipsets.
> > > Some of them can be set up either 486 or pentium.
> > >
> >If you're going to use it as a server, e.g. under Netware, you don't need
> >a hot
> >processor. The disk I/O proceeds via DMA at the rate at which the drives can
> >go, and the network I/O does too. The CPU is idle much of the time, since it
> >really only manages the transfers and handles directories. With one or two
> >people, 4 at the most, even a '386SX-16 would be plenty.
> > >
> > > > While I haven't seen any 386 VLB boards, I've got an AST 386 where
> > the CPU
> > > > (AMD surface-mount clone) is fit on a daughter card which plugs into
> > a VLB
> > > > slot, though it's far away from the ISA slots.
> > >
> > > AST uses still-born CUPID slot. Usually grouped of 3 slots. I have
> > > seen 386dx, 486 CPUID cards but they don't exhange easily on
> > > different AST CUPID motherboard. I know because I have done that
> > > before. AST did make pentium CPUID cards also.
> > >
> > > > Another odd PC mobo I've got is a 486 board with ISA, possible VLB as
> > well,
> > > > and a DX-50 Overdrive processor. Well, that's not so strange, but in the
> > > > middle of the board, there is a DIN connector, like a VME or Nubus
> >connector.
> > > > What could that be?
> > >
> > > Sounds like AMI board for 486 or cache card upgrade for that DIN
> > > connector. I had this one before (386dx 25 version (baby AT w/
> > > bit of left edge bit wider than rear half. That also has this DIN
> > > style connector for 486 upgrade). Very nice! I think that model I
> > > had was type 19 or 39 (386-486). Would like to find one again.
> > >
> > > The bizarre motherboard I can think of using 386sx style CPU based on
> > > IBM 486SLC2 50 w/ 2 VLB slots and 64K cache room for extra 64K for
> > > 128K total. It does work but performance stank due to 32 bits vlb
> > > crimped down to 16 then back up 32 and vice vesa. A vendor made them
> > > for IBM and IBM used them in their "early clones" machine. Took me
> > > long time to find the jumper info. Ugh.
> > >
> > > VLB was originally designed for 486 but also works w/ 386dx cpus
> > > based on OPTI. I had one but dumped it because the designer of it
> > > wasn't doing good job of it w/ certain cards espcially ATI Ultra in
> > > 16bit bios mode is dead. In 8 bit mode works but very slow.
> > >
> > > > --
> > > > En ligne avec Thor 2.6a.
> > >
> > > Cheers,
> > >
> > > Wizard
> > >
> > >
>
> ----------------------------------------
> Founder, Lead Writer, Tech Analyst
> and Web Designer Boff-Net Technologies
> http://boff-net.dhs.org/index.html
> ---------------------------------------
>
>
Received on Sat Oct 27 2001 - 12:20:12 BST