first step getting VAX 6000-400 booted ...

From: Carlini, Antonio <Antonio.Carlini_at_riverstonenet.com>
Date: Sun Oct 28 07:14:08 2001

> Eric Dittman wrote:
>
>If you can find the manual on the DMB32 it should have the pinouts
for
>the cable, which will make building a converter even easier.

        The user guide states that the DMB32 supports
        the LP32 generic printer specification.

        The pinout is on p1-13:
                
         1 - DAT 3
         5 - DAT 6
         6 - DAT 7
         8 - STROBE
        12 - ONLINE
        14 - CONN
        17 - DAVFU
        18 - DEMAND
        20 - DAT 1
        22 - DAT 2
        23 - DAT 5
        24 - DAT 4
        26 - DAT 0
        27-25 - MODULE GROUND

        It is a TTL-level interface.

        Antonio
        arcarlini_at_iee.org
Received on Sun Oct 28 2001 - 07:14:08 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:21 BST