changing Aviion monitor refresh setting

From: r. 'bear' stricklin <>
Date: Fri Sep 21 01:59:46 2001

1) Power on the machine.
2) Wait approximately ten minutes.
3) Press 'reset'.
4) Wait a further thirty seconds.
5) Type <CTRL>-V on the console keyboard. The machine should beep.
6) Type '1' to set the video system to 70 Hz sync or '2' for 60 Hz.

additionally, the default mode for the serial console (which the system
will automatically use if there is no keyboard plugged in at power-on) is:


Good luck. Hopefully this will help somebody get his Aviion going.

Received on Fri Sep 21 2001 - 01:59:46 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:26 BST