SCSI CDROM 'juke box' setup

From: Don Maslin <>
Date: Fri Dec 13 00:00:01 2002

A while back, I acquired a 7-disk NEC MultiSpin 2Xc drive which uses
a SCSI interface. With no particular difficulty, I installed the WD
SCSI card and the drive, the CONFIG.SYS and AUTOEXEC.BAT patches and
quickly had access to the drive. Well, I had access to the first
disk in the drive. The existence of the remaining six were not
acknowledged! The WD diagnostic program sees all seven, so I tend to
doubt that it is a SCSI problem, but nothing that I have done relative
to MSCDEX has had any useful effects either.

For perspective, this testing is being done on a Pentium II 133MHz
equipped motherboard with 16Mb memory running PCDOS 6.3. I have yet to
try it with W98.

Can anyone offer any hints, kinks, experience, or clues of any variety
as to how to access the remaining 86% of this 'juke box'?

                                                - don
Received on Fri Dec 13 2002 - 00:00:01 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:40 BST