Mylex problems

From: Richard Erlacher <edick_at_idcomm.com>
Date: Sun Feb 3 13:45:29 2002

I don't think he wants to boot from the SCSI, but he does want to exploit the
striping capability of the MYLEX board. What's more, he's going to want to
attach both narrow and wide drives, though I doubt the MYLEX software will
allow striping across different drive sizes.

Right now, I simply wish I could force the assignment of specific resources to
the MYLEX board via the Plug-n-Pray logic, but that doesn't seem to work.

Dick
----- Original Message -----
From: "Tothwolf" <tothwolf_at_concentric.net>
To: <classiccmp_at_classiccmp.org>
Sent: Sunday, February 03, 2002 12:23 PM
Subject: RE: Mylex problems


> On Sun, 3 Feb 2002, Russ Blakeman wrote:
>
> > I know that he won't boot from SCSI unless he disables the IDE
> > controller but otherwise the Mylex should work in his system. Make
> > sure that IDE is disabled and that the drive types in BIOS are set to
> > none or 1 and see where that gets him with it.
>
> I think it depends on the BIOS of the motherboard. My workstation system
> has both IDE and SCSI, but boots from drive 0 on the first SCSI chain.
>
> -Toth
>
>
Received on Sun Feb 03 2002 - 13:45:29 GMT