I think Don was suggesting that you just crimp connectors on each end for
the VR201. That would mean the connections are just straight through.
As I recall, the BCC03 is for the VR241 on a PRO, not a Rainbow. And I
doubt you could use a ribbon cable and crimp connectors for it. And the
BCC03 doesn't work on a Rainbow. You need, I think, a BCC17 for a VR241
and a Rainbow.
Dave
Lawrence Walker wrote:
>
> How would you do that ? I waited about 2 years before I finally found a
> BCC02 to connect my mono 'bow to my VR201. To build one with ribbon
> cable using the 15-pin plugs would be a lot of fiddly soldering. There's 8
> leads on each end to solder. For color to make a BCC03 that would be 12 on
> each end.
>
> Lawrence
>
> >
> > On Fri, 15 Feb 2002, Geoff Reed wrote:
> >
> > > Speaking of rainbows... anyone in the seattle area have a VR201 and cable for
> > > a rainbow? I just realized that my VR241 and cable had been stolen a little
> > > while back and all of my 201's were chucked due to burnt circuit boards.
> >
> > If you can find the VR201, just a plain ribbon cable and mating
> > conductors will serve quite well.
> > - don
> >
> >
>
> Reply to:
> lgwalker_at_mts.net
--
David C. Jenner
djenner_at_earthlink.net
Received on Mon Feb 18 2002 - 10:04:48 GMT