DEC Rainbows ...

From: Don Maslin <donm_at_cts.com>
Date: Mon Feb 18 12:43:30 2002

On Mon, 18 Feb 2002, Lawrence Walker wrote:

> How would you do that ? I waited about 2 years before I finally found a
> BCC02 to connect my mono 'bow to my VR201. To build one with ribbon
> cable using the 15-pin plugs would be a lot of fiddly soldering. There's 8
> leads on each end to solder. For color to make a BCC03 that would be 12 on
> each end.

Lawrence, I did say ribbon cable, so I assumed that one would use IDC
connectors as I did. NO soldering!
                                                 - don


> >
> > On Fri, 15 Feb 2002, Geoff Reed wrote:
> >
> > > Speaking of rainbows... anyone in the seattle area have a VR201 and cable for
> > > a rainbow? I just realized that my VR241 and cable had been stolen a little
> > > while back and all of my 201's were chucked due to burnt circuit boards.
> >
> > If you can find the VR201, just a plain ribbon cable and mating
> > conductors will serve quite well.
> > - don
> >
> >
>
>
>
> Reply to:
> lgwalker_at_mts.net
>
Received on Mon Feb 18 2002 - 12:43:30 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:47 BST