How do I startup this PDP10 with TOPS 10/20 ??

From: Zane H. Healy <healyzh_at_aracnet.com>
Date: Mon Jan 21 15:25:28 2002

Your first stop should be my web site.
http://www.aracnet.com/~healyzh/pdp10emu.html
It has links to everything you need.

For DEC emulation in general see:
http://www.aracnet.com/~healyzh/decemu.html

                Zane


>
> This PDP10 simulator that is ;)
>
> I'm hacking on the simh ( http://simh.trailing-edge.com/ ) and have
> the pdp10 module compiled and running a-ok. Also looking at the
> PDP10 Software kit ( http://old-pdp-10.trailing-edge.com/ ) but I'm
> rather clueless where to even begin. Everything in the TOPS-10
> table are *.tap tapes, one is tagged "BOOTABLE". I d/l that, attach
> it to TU0 and boot TU0. Nothing happens but when I stop the sim
> it reports: Simulation stopped, PC: 000000 (000000000011)
>
> Another one marked TOPS-10 7.03 KS Bootable tape I just tried,
> with similar results.
>
> Any hints on where to start exploring or should I just give this up
> as hopelessly impossible w/o a wall of orange books and years
> of experience??
>
> Thanks
>
> Chuck
> cswiger_at_widomaker.com
>
Received on Mon Jan 21 2002 - 15:25:28 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:56 BST