HP16C

From: Jonathan Engdahl <jrengdahl_at_safeaccess.com>
Date: Wed Jan 23 11:23:21 2002

That's the "hexalator", right? Mine finally gave up the ghost from overuse.
You don't need manuals. Just poke at it until you figure it out.

IIRC, the programming codes are the row and column of the key. If the number
of digits of a result is wider than the screen there is a way to scroll
sideways. There is a key sequence to set the word width. Everything else is
either obvious (to one who has had an HP before) or written on the back.

The manual is probably in a box the attic. The kids will find it after I'm
dead.

--
Jonathan Engdahl            Rockwell Automation
Principal Research Engineer 1 Allen-Bradley Drive
Advanced Technology         Mayfield Heights, OH 44124 USA
Mayfield Heights Labs       jrengdahl_at_safeaccess.com 440-646-7326
----- Original Message -----
From: "emanuel stiebler" <emu_at_ecubics.com>
To: <classiccmp_at_classiccmp.org>
Sent: Wednesday, January 23, 2002 9:39 AM
Subject: HP16C
> Hi,
> anybody here has the manuals for it ?
>
> cheers & thanks
>

Received on Wed Jan 23 2002 - 11:23:21 GMT