Wanted: Kaypro 2'84/2x

From: Don Maslin <donm_at_cts.com>
Date: Mon Jun 3 23:46:47 2002

On Mon, 3 Jun 2002, Richard Erlacher wrote:

> I've got to agree with Tony on this one ... these machines seldom appear in
> the "thrift stores" I visit, and I don't think I've seen one in nearly a
> decade, even in the used/surplus computer stores. What's more, theyre so
> elementary in their functions, consisting of standard TTL parts and
> conventional peripherals, that you should encounter no serious difficulty
> other than mechanical parts that may be broken. If it died on its own, it's
> likely that an electrolytic capacitor in the PSUpr a tantalum on the main
> board is at fault. If you unplug the power to the main board and suddenly
> find the PSU provides the correct voltages, you should be able to repair the
> thing easily, though you'll be much more proficient at desoldering IC's and
> soldering sockets in their place when you're done.

Well, before you start desoldering IC's you should remove the power
supply board and resolder all of the pins that mate up with the long
power connector. Kaypro's were infamous for developing a cracked solder
joint in one or more of the pins.

                                                 - don
> Dick
>
> ----- Original Message -----
> From: "Tony Duell" <ard_at_p850ug1.demon.co.uk>
> To: <cctalk_at_classiccmp.org>
> Sent: Monday, June 03, 2002 12:30 PM
> Subject: Re: Wanted: Kaypro 2'84/2x
>
>
> > >
> > > My Kaypro 2'84 died.
> >
> > How dead? Does it do anything at all at power-up?
> >
> > > I need a replacement as this was the only CP/M machine
> >
> > Are you certain that it's going to be harder to repair the existing
> > machine than to find a replacement (as an aside, I've never seen a Kaypro
> > _anything_ in the UK). From what I've heard, though, Kaypros are pretty
> > standard circuitry and shouldn't be hard to repair.
> >
> > -tony
> >
>
>
Received on Mon Jun 03 2002 - 23:46:47 BST