2708 Programming Algorithm?

From: Richard Erlacher <edick_at_idcomm.com>
Date: Mon May 6 18:29:56 2002

The algorithm is spelled out in the datasheet at that URL I posted early
today. It's not rocket science.

Dick

----- Original Message -----
From: "Joe" <rigdonj_at_cfl.rr.com>
To: <classiccmp_at_classiccmp.org>
Sent: Monday, May 06, 2002 7:58 PM
Subject: Re: 2708 Programming Algorithm?


> At 12:19 PM 5/6/02 -0700, you wrote:>
> >>Steve,
> >>
> >> I don't have the programming instructions for the 2708 but I do have
them
> >for the intel 8708 and intels later manuals state that they're the same.
Here's
> >what I have in the sept 1975 8080 Microcomputer Systems User's manual.
> >>
> >
> >Hi
> > I believe the main difference between the 2708 and 8708 is that
> >the 8708 could handle negative levels on the data bus so it
> >could be connected directly to the 8080's data bus.
> >Dwight
>
> Someone may have already called you on this one but in case they haven't
the 8080 and 8708 both use TTL inputs and outputs. Even the 8008 was TTL. The
4004 used negative voltages to indicate a logic 1. I'm not sure about the
4040.
>
> Joe
> >
> >
> >
>
>
Received on Mon May 06 2002 - 18:29:56 BST