>Standard non-parity (parity work OK too) 30pin SIMMS, 80ns or better, max
>looks to be 16MB SIMMS (times 8 = 128MB ram - trust me, you won't be
>wanting to wait the 10 minutes or so the machine will take to initialize
>that on every hard reboot - 40MB was enough pain for me):
The only thing to watch for, IIRC, is there are a few, odd, parity only
versions of the IIci. I believe the logic board is labeled as such, and
they are pretty rare, so odds are you won't have one. But it might be
worth a quick look at the board to be certain (IIRC, it is labeled
"Parity" near the SIMM slots).
As long as you don't have that odd version, then parity or non parity
will work fine in the IIci (but I recommend you keep them all the same
type)
-chris
<
http://www.mythtech.net>
Received on Fri Nov 01 2002 - 14:12:00 GMT