----- Original Message -----
From: "SPC" <spedraja_at_ono.com>
To: <cctalk_at_classiccmp.org>
Sent: Saturday, April 05, 2003 7:32 AM
Subject: Re: HP9885 8" floppy unit
> Hello, Robert:
Hi!
> * What model of graphic screen can I use with the 380 ? I should like to
> know
> about one (or more) model with all its identificacion data to search it in
> eBay
> or some reseller.
My 380 has an A1416A Kathmandu (a.k.a. Color VRX) (1280x1024 _at_ 60 hz, 8
bits, DIO-II). It has 3 BNC sync on green output, you'll need either an
adapter to a VGA monitor or a monitor with 3 BNC.
> * What model of serial terminal or screen can I use with the 380 to plug
> into
> the RS-232 port of this computer ? Same than previous.
Any null-modem cable to a peasea set to 9600,8N1 should work. Note,
however, that the serial console (vs the graphics head/HIL keyboard) is
selected by a firmware command. The commands can be entered blindly without
a monitor attached, but a HP-HIL keyboard *MUST* be used if it is not set to
a serial console already.
You can find some more info on the page for the hp300 port of NetBSD,
http://www.netbsd.org/Ports/hp300, and Jim Conrad may have some parts
avaliable, you can find his original post in the classiccmp archives,
http://www.classiccmp.org.
>
> (Of course I accept all reasonable offer from somebody in Europe. This
> includes
> one GPIO board)
How many RAM boards are installed?
>
> Thanks and Greetings
> Best Regards
> Sergio
Bob
Received on Sat Apr 05 2003 - 07:39:00 BST