Cromenco Z2 power supply (or equivalent)

From: M H Stein <mhstein_at_canada.com>
Date: Wed Aug 27 19:31:05 2003

Hi Sergio:

I've got one too, from a Z-2 I scrapped some time ago, but unfortunately
I'm in Canada, so shipping would be just as problematic as for Joe in FL.
I assume you need the whole back panel (31x43x13 cm,10kg) since all the parts
are discrete and mounted on it. If you want to construct one, maybe it
would be practical to send you the parts, especially the transformer;
the diodes and caps (130,000 and 29,000 mf, x2) you could probably obtain
there. Voltages are +/-18V and +8V (No -8V), but I can't find any mention
of the current rating (but it's adequate for light arc-welding, I'm sure).
If you like, I can scan and e-mail you the schematic.

By the way, congratulations on your countryman winning the Hungarian
GP and setting several new records in the process; quite an achievement!

mike

-----------------------Original message----------------------

Message: 9
Date: Sun, 24 Aug 2003 18:40:46
To: cctalk_at_classiccmp.org
From: Joe <rigdonj_at_cfl.rr.com>
Subject: Re: Cromenco Z2 power supply (or equivalent)
Reply-To: cctalk_at_classiccmp.org

Sergio,

   I think I have one but I'm in Florida and I expect that the shipping
would be EXPENSIVE.

    Joe

At 08:13 PM 8/25/03 +0200, you wrote:
>Hi again. I aproach the occasion, even when I hadn't idea of speak
>about it. Somebody knows where I can obtain one Power Supply
>(original or equivalent) for one Cromenco Z2 backplane ?
>I can't check yet more information, but I'm suggested that it uses
>+8v, +18v, -8v and -18v power. Some people has give me kind
>information privately, but I should like to obtain one PS before
>try to construct one here.
>
>Thanks in Advance.
>
>Sergio
Received on Wed Aug 27 2003 - 19:31:05 BST